V-RAD electric series are a new generation of electric torque wrenches used for the installation or removal of heavy duty fasteners where accuracy, power, and safety are required.

V-RAD electric series are a new generation of electric torque wrenches used for the installation or removal of heavy duty fasteners where accuracy, power, and safety are required. The V-RAD series tools are an economical solution for many service and construction jobs.

Quick adjust torque settings
“Dial a torque” for maximum versatility and efficiency – 11 fixed settings
Equal power in forward and reverse
Convenience and cost effective use of same tool for break away and final torque
Advanced ultra-durable electric motor design
Extreme duty design to reduce maintenance cost and increase reliability
Several models available with 90° angled gearbox for better accessibility in low clearance applications
Extremely low noise level – only 80 dB.

Model Bolt size* Square drive Torque range RPM
V-RAD 6 M16 – M27 ¾» 150 – 550 Nm 29
V-RAD 14 M20 – M33 ¾» 400 – 1.350 Nm 8
V-RAD 14-90° M20 – M33 ¾» 400 – 1.350 Nm 8
V-RAD 21 M24 – M36 1″ 700 – 2.150 Nm 6
V-RAD 31 M24 – M36 1″ 1.100 – 3.100 Nm 4
V-RAD 31-90° M24 – M36 1″ 1.100 – 3.100 Nm 4

The MV-RAD will quickly tighten or loosen bolts with high accuracy and reliability. The torque can be set by a membrane key control stageless with incensements of 1 Nm. Torque and more parameters can be programmed individually on custom demands. In addition, this torque wrench is equipped with an angle function.

Optional, the MV-RAD also features a special Bolt Check function. This program allows the operator to check if an already tightened bolt is still within torque specification. The MV-RAD is able to verify the existing torque and will not add any extra torque while doing this. If the bolt requires further tightening, it will do so automatically and report the degrees of turn needed. This feature works very well in combination with the Smart socket™️

Model Bolt size* Square drive Torque range RPM
MV-RAD 6 M16 – M27 ¾» 65 – 650 Nm 38
MV-RAD 14 M20 – M33 ¾» 140 – 1.400 Nm 11
MV-RAD 14-90° M20 – M33 ¾» 140 – 1.400 Nm 13
MV-RAD 21 M24 – M36 1″ 215 – 2.150 Nm 5
MV-RAD 34 M24 – M36 1″ 340 – 3.400 Nm 4
MV-RAD 34-90° M24 – M36 1″ 340 – 3.400 Nm 6
MV-RAD 45 M27 – M42 1″ 450 – 4.500 Nm 3
MV-RAD 45 M27 – M42 1½» 450 – 4.500 Nm 3
MV-RAD 45-90° M27 – M42 1″ or 1½» 450 – 4.500 Nm 3
MV-RAD 60 M30 – M48 1½» 600 – 6.000 Nm 2
MV-RAD 70 M30 – M52 1½″ 700 – 7.000 Nm 2
MV-RAD 70-90° M30 – M52 1½″ 700 – 7.000 Nm 2
MV-RAD 80 M36 – M56 1½» 800 – 8.000 Nm 2