The Hybrid XT Personality Module (PM) is a sensor interface designed specifically for IceFree Hybrid XT Turbine Control Solutions. The PM converts the frequency output of the sensor to the signal that your wind turbine controller requires for wind speed and direction.

The type of output signal is selectable from a list of predefined sensor modes, which are available through a push button interface on the front of the PM.

Connections are made through pluggable terminal blocks. A two-digit display provides visual feedback on the status and operation of both the sensor and PM. A 15-amp fuse is provided for heater power. LED status lights indicate the presence of heater power (green) or a blown fuse (red).

Power requirements:

• Supply voltage: 12-24 V DC
• Supply current: 80 mA (typical) plus 40 mA (typical) for Hybrid Sensor
• Heater supply voltage: 24 V AC or DC

Output signal type user selectable:

Anemometer output simulates:
• IcefreeII
• Icefree3
• NRG 40C
• 0 to 20 mA, 4 to 20 mA
• 0 to 5 V, 1 to 5 V

Vane output simulates:
• Icefree, 4-Channel NPN
• Icefree, 4-Channel Push-Pull
• Icefree, 2-Channel PNP
• Icefree, 1-Channel 0-170° PNP
• Icefree, 1-Channel 190 to 360° PNP
• 0 to 20 mA, 4 to 20 mA
• 0 to 5 V, 1 to 5 V
• 4 bit Gray code, push-pull
• Icefree, 1 channel PWM PNP

Dimensions: 82mm (L) x 90mm (W) x 50mm (H)

Mounting: Snaps to 35 mm DIN rail to DIN EN 50022