Pair your anemometers and wind vanes with the right connection cable for your project to get the most out of your sensors. Designed for durability and ease of use, our sensor cables are field-proven and ready to ship to your site or office within days of your order.
S1 Cable
Compatible with NRG S1 anemometers.
Sensor end pre-wired with 3-pin female M12 connector.
Logger end terminates in flying leads.
Available in a variety of lengths, up to 160m.
Shielded and RoHS-compliant.
Sensor Cable Kit – 2C
Sensor cables comprised of 20-gauge, shielded cable with drain wire and soldered terminal connectors for easy field installation.
Compatible with NRG 40C and Class1 anemometers.
Sensor end terminates in spade lugs which are secured to sensor terminals with nut.
Logger end terminates in flying leads, pre-stripped and tinned (RoHS).
Sensor cable type: 2 conductor, 20 AWG, Shielded.
Shield: Foil with drain wire.
Jacket: Gray UV stabilized PVC.
Various lengths available, from 5m to 300m.
Sensor Cable Kit – 3C
Sensor cables comprised of 20-gauge, shielded cable with drain wire and soldered terminal connectors for easy field installation.
Compatible with NRG wind direction vanes and 40H anemometer.
Sensor end terminates in spade lugs which are secured to sensor terminals with nut.
Logger end terminates in flying leads, pre-stripped and tinned (RoHS).
Sensor cable type: 3 conductor, 20 AWG, Shielded.
Shield: Foil with drain wire.
Jacket: Gray UV stabilized PVC.
Various lengths available, from 5m to 300m.
WindSensor Cable
Compatible with WindSensor (Risoe) P2546A-OPR and P2546C-OPR anemometers.
Sensor end pre-wired with Lemo plug FFA.1S.152LN, FFA.1S.153.LN, FFA.1E.650.CTAC45 straight plug connector.
Logger end terminates in flying leads, pre-stripped and tinned (RoHS).
Sensor cable type: 2 conductor twisted pair, 23 AWG, braid shielded, UV resistant.
Shield: Braided.
Jacket: Polyurethane.
Various lengths available, from 5m to 100m.
Thies FCA Cable
Compatible with Thies First Class Advanced anemometers.
Sensor end pre-wired with Binder 99.5672.09.08 female connector.
Logger end terminates in flying leads with ferrules.
Sensor cable type: Li9Y11Y, 4 conductors, 20 AWG, braid shielded.
Shield: Braided, Wire 0.120mm (0.0047”) galvanized.
Jacket: Polyurethane (halogen-free). Shore hardness A88 ±3.
Various lengths available, from 5m to 100m
